[Q16-Q31] 100% Guaranteed Results 1Z0-902 Unlimited 60 Questions [2024]

Rate this post

100% Guaranteed Results 1Z0-902 Unlimited 60 Questions [2024]

1Z0-902 Dumps PDF – Want To Pass 1Z0-902 Fast

NEW QUESTION 16
You have been notified by your Network Administrator that an upstream switch has been replaced due to a hardware fault. Which command verifies that the client network on your Exadata X9M-2 Database Server is available via both client switches?

ifconfig -a legrep “re0| re1”

/opt/oracle.SupportTools/ibdiagtools/checkbadlinks.p1 -all

netstat -rn

cat /proc/net/bonding/bondeth0

NEW QUESTION 17
Which two statements are true about enabling write-back flash cache?

Write-back flash cache is on by default for High Capacity Storage Servers in High Redundancy configurations.

Write-back Flash Cache cannot be used on Extreme Flash Storage Servers.

When enabling write-back flash cache in a rolling manner, DBCLI should be used to inactivate the grid disks on all cells first.

Before write-back flash cache is enabled, you need to drop the Flash Cache first.

When enabling write-back flash cache in a non-rolling manner, you need to drop the Persistent Memory Commit Accelerator (PMEMLog) first.

NEW QUESTION 18
Which are three customer options for hosting the Platinum Services Advanced Support Gateway?

Install on Oracle Database Appliance.

Provide individual x86 64-Bit gateway hardware.

Install in Oracle Virtual Machine with required hardware.

Purchase the recommended x86 64-Bit gateway hardware from Oracle.

Install on Exadata Engineered System.

NEW QUESTION 19
Which two options can be used to identify a damaged or failing flash card on an X9M-2 Database Machine High Capacity storage server?

using the CELLCLI CALIBRATE command on the storage server after logging in as the celladmin user

using the CELLCLI CALIBRATE command on the storage server after logging in as the root user

hardware monitoring using the storage server ILOM

using the CELLCLI list LUN DETAIL command as the celladmin user

NEW QUESTION 20
Which two Exadata security features would you configure to control which databases can access which griddisks, when multiple databases share space on your storage servers in an unpartitioned storage grid?

Exadata storage realms using ASM-scoped security mode

File permissions on the griddisks in each database server

Using EXADCLI instead of CELLCLI to create the griddisks

File permissions on the griddisks in each storage server

Exadata storage realms using database-scoped security mode

NEW QUESTION 21
Which two activities are supported on the storage servers in an Exadata Database Machine?

changing the root password

upgrading a device driver for hard disks when inserting a replacement disk after a hard disk failure

installing an alternative package manager

upgrading the Storage Server software package using rpm

configuring secure shell user equivalency for the cellmonitor user

NEW QUESTION 22
An Exadata X9M-2 Elastic Rack with 4 Database Servers and 8 HC Storage Servers and 3-phase 24kVA PDUs is being installed in a Data Center. However, the Data Center is only providing enough power for a single cable from each PDU. Which statement is correct?

A splitter cable can be used to provide power to all PDU cables.

The power cables from the servers to the PDUs can be rearranged inside the rack following OECA guidance to utilize a single PDU power cable.

The installation cannot proceed until two power feeds are available per PDU.

The installation can go ahead, no change is required.

NEW QUESTION 23
Which are two correct statements about backing up Exadata Database Machine?

Backup of the Oracle Cluster Registry, which also contains Voting Disk information, is automatically maintained on the file system of the first database server.

Backing up Exadata Storage Server Software is critical for restoration.

For high availability, system area can be on the first two disks and M.2 devices.

The M.2 disk is hot pluggable and can be replaced when the power is on, but you will have to restore the system data manually.

Use a snapshot-based backup of an Oracle Exadata Database Machine database server software.

NEW QUESTION 24
Which are three customer options for hosting the Platinum Services Advanced Support Gateway?

Install on Oracle Database Appliance.

Provide individual x86 64-Bit gateway hardware.

Install in Oracle Virtual Machine with required hardware.

Purchase the recommended x86 64-Bit gateway hardware from Oracle.

Install on Exadata Engineered System.

NEW QUESTION 25
Which dbmcli command is NOT valid on Exadata X9M?

dbmcli -e “LIST METRICHISTORY WHERE name LIKE ‘DS_.*'”
B) dbmcli -e “LIST METRICCURRENT WHERE name = ‘DS_TEMP’ “

dbmcli -e “LIST IBPORT DETAIL”

dbmcli -e “LIST ALERTHISTORY WHERE agelnMinutes < 15”

NEW QUESTION 26
A new Exadata Quarter Rack with 2 Database Servers and 3 HC Storage Servers and 3-phase 15kVA PDUs is being installed in a Data Center. However, the Data Center is only providing enough power for a single cable from each PDU.
Which statement is correct?

The installation can go ahead, no change is required.

The installation cannot proceed until two power feeds are available per PDU.

A splitter cable can be used to provide power to all PDU cables.

The power cables from the servers to the PDUs can be rearranged inside the rack following OECA guidance to utilize a single PDU power cable.

NEW QUESTION 27
Which dbmcli command is NOT valid on Exadata X9M?

dbmcli -e “LIST METRICHISTORY WHERE name LIKE ‘DS_.*'”

dbmcli -e “LIST METRICCURRENT WHERE name = ‘DS_TEMP’ “

dbmcli -e “LIST IBPORT DETAIL”

dbmcli -e “LIST ALERTHISTORY WHERE agelnMinutes < 15”

NEW QUESTION 28
Which two statements are correct about adding an additional database server to a physical Exadata X9M Database Machine using Oracle Exadata Deployment Assistant (OEDA)?

Do not proceed if the OEDA Validate Configuration File step displays an error message about missing files p6880880.zip.

Executing /opt/oracle.supportTools/reclaimdisks.sh -free -reclaim on each Exadata X9M Database server is required to reclaim disk space and perform partition reconfiguration.

In order to configure the servers with Oracle Exadata Deployment Assistant (OEDA), the new server information must be entered in OEDA, and the configuration file must contain existing nodes.

The applyElasticConfig.sh script performs network configuration for the new servers. The new servers are restarted at the end of the process.

It is required to install OEDA on the first new database server.

NEW QUESTION 29
Which two statements are true in regards to starting the Exadata Virtual Machine?

To see Oracle Linux boot messages during guest startup, use -console option with the vm_maker -start-domain command.

Use vm_maker -start-domain to start a virtual machine manually.

Use vm_maker boot-from-iso command to boot a virtual machine.

To streamline the diagnosis of virtual machines, one ISO file is used for multiple Oracle Exadata System Software releases.

Use vm_maker -auto-start command to configure a virtual machine to start automatically when the KVM host is started.

NEW QUESTION 30
Which four actions should you take before proceeding with applying updates to your Exadata Database Machine?

Consult My Oracle Support note 888828.1 to determine the current recommended Exadata software release.

Check the Exadata Critical Issues My Oracle Support note 1270094.1 for any issues not added to the latest version of exachk.

Run exachk and resolve only WARNINGS that you have not seen before.

Run the appropriate patchmgr preqequisite check step for each component being updated.

Run patchmgr –all_comp -autofix -autobackup -upgrade -rolling.

For database servers, perform a server backup using patchmgr -dbnodes db_list_file -backup -rolling.

NEW QUESTION 31
Examine this list of software components:
1. Oracle KVM Guest
2. Oracle Enterprise Manager Agent (OMA)
3. ASM instance
4. RDBMS instance
5. Automatic Diagnostic Repository Command Interpreter (ADRCI)
6. CELLCLI
7. Cell Server(CELLSRV)
8. diskmon
9. Restart Server (RS)
10. Management Server (MS)
What is the correct location where these software components can run in the standard Exadata Database Machine deployment?

2, 3, 4, 8, and 10 run on the database servers; 1, 5, 6, 7and 9 run on the Exadata storage servers.

1, 2, 3, 4, 9 and 10 run on the database servers; 5, 6, 7, 8, 9, and 10 run on the Exadata storage servers.

1, 2, 3, 4, 5, 8, 9 and 10 run on the database servers; 5, 6,7, 9 and 10 run on the Exadata storage servers.

3, 4, 8, and 10 run on the database servers; 1, 2, 5, 6, 7 and 9 run on the Exadata storage servers.

1, 2, 3, 4, 8 and 9 run on the database servers; 5, 6, 7, 9 and 10 run on the Exadata storage servers.

Oracle 1z1-902 certification exam is designed for IT professionals who wish to demonstrate their expertise in implementing and managing Oracle Exadata Database Machine X8M systems. 1Z0-902 exam covers a range of topics related to the implementation and maintenance of Oracle Exadata Database Machine X8M systems, including hardware and software installation, configuration, and maintenance.

Updated Verified 1Z0-902 Q&As – Pass Guarantee: https://www.dumptorrent.com/1Z0-902-braindumps-torrent.html

Free Exam Dumps Torrent

[Q16-Q31] 100% Guaranteed Results 1Z0-902 Unlimited 60 Questions [2024]

Leave a Reply Cancel reply

Related Posts

Unique Top-selling 1z0-1067-24 Exams – New 2025 Oracle Pratice Exam [Q35-Q52]

The Best 1z0-1125-2 Exam Study Material and Preparation Test Question Dumps [Q22-Q40]

Updated Jun-2024 Premium 1z0-1114-23 Exam Engine pdf – Download Free Updated 32 Questions [Q10-Q32]

Get Feb-2024 updated Exam 1z0-1114-23 Dumps with New Questions [Q19-Q33]

[Jan 12, 2024] Valid 1z0-1114-23 Test Answers & 1z0-1114-23 Exam PDF [Q13-Q35]

Download Oracle 1z0-1125-2 Mock Test Study Material [Q24-Q43]

Leave a Reply Cancel reply