NO.22 An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D

NO.23 An administrator is replacing the current access switches with AOS-CX switches.The access layer switches must authenticate user and networking devices connecting to them.Some devices support no form of authentication and some support S02 1X Some ports have a VoIP phone and a PC connected to the same port where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.
Which statement is correct about this situation?

NO.24 A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?

NO.25 An administrator is configuring BGP and has two connections to a service provider to two different local routers.
Which BGP metric should the administrator configure to influence which local router the service provider will use to reach certain routes?

NO.26 An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?

NO.27 What would prevent two OSPF routers from forming an adjacency? (Select two.)

NO.28 An administrator wants to implement a virtual switching technology that implements a single control-plane solution. Which S-CX switches would meet these criteria?

NO.29 Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)

NO.30 What would prevent two OSPF routers from forming an adjacency? (Select two.)

NO.31 What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?

NO.32 An administrator wants to use an existing Aruba gateway’s firewall policies to filter both wireless and wired traffic. Which AOS-CX switch feature should a customer implement to ensure the gateway applies the same or similar firewall policies to users’ wired and wireless traffic?

NO.33 A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of “Unknown”.
What is the cause of this issue?

NO.34 The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

NO.35 A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?

NO.36 Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

NO.37 A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS’CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?

NO.38 An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.
Which statement is correct about this situation?

NO.39 A network administrator is implementing BGP for a larger network. The network has over 20 exit points across 15 different BGP routers. The administrator does not want to implement a fully-meshed iBGP peering between all BGP routers.
Which feature should the administrator implement to reduce the number of peers the administrator needs to define?

NO.40 A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?

NO.41 What is correct regarding policy-based routing?

NO.42 An administrator has an AOS-CX switch configured with:

Based on the above configuration, how many OSPF routes will routing switches see in Area 1?

NO.43 A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)

NO.44 A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

NO.45 A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?

NO.46 A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.
Which feature should the administrator implement to prevent this situation?