HPE6-A69 Free Exam Questions & Answers PDF Updated on Feb-2024 [Q16-Q34]

4/5 - (1 vote)

HPE6-A69 Free Exam Questions and Answers PDF Updated on Feb-2024

Latest HPE6-A69 Exam Dumps Recently Updated 60 Questions

NEW QUESTION 16
With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway” (Select two.)

IP Protocol 6 should not be blocked on me datapath

IP Protocol 47 should not be blocked in the data-path

The ArubaOS-CX switch and Aruba gateway should have an end-to-end MacSec connection

The ArubaOS-CX switch and Aruba gateway should be EBGP peers.

Change the default MTU on the data-path between the switch and gateway

NEW QUESTION 17
Which statement is true about NAE scripts’?

The System Resource Monitor is the only script Installed on the system by default.

The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default

No script is installed on the system by default.

The Health Monitor is the only script installed on the system by default.

NEW QUESTION 18
Refer to the following configuration:

How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches?
(Select two)

Use NetEdit to replicate the configuration of QoS policies to all wired switches

in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.

With ClearPass and downloadable user roles, you can add QoS policies for user roles

QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches

The ArubaOS-CX switch requires plain-text authentication with OSPF.

The third-party switch should be configured with MD5 authentication

The ArubaOS-CX switch does not expect authentication with OSPF.

The third-party switch should be configured with key chain authentication

NEW QUESTION 20
When an ArubaOS-CX switch uses the temporary copy of the coring state database, how does NetEdit validate if the configuration is correct?

Semantic validation

Syntax validation

Deploy validation

Planned validation

NEW QUESTION 21
ArubaOS-CX 8325 VSX configuration has a Tailed ISL link between the switches with keepalive status established. While troubleshooting the condition, what is the expected behavior of the VSX traffic flow in the current condition?

vsx tables are n sync

VSX tables are out of sync

VSX nodes Keep forwarding traffic over its interfaces

VSX protection state is OK

VSX peer is seen as down

NEW QUESTION 22
Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

NEW QUESTION 23
An administrator is utilizing the orchestration capabilities of NetEdit. What are the two plan types that can be created Configuration management plan

Firmware plan

Deployment plan

Configuration plan

NEW QUESTION 24
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.
What are the minimum steps that should be performed to mitigate this condition? (Select two)

Implement arp ACLs to define trusted MAC address to IP bindings

Enable ‘arp inspection’ on the end-user physical ports

Enable ‘arp inspections on the end-user VLAN.

Implement dhcpv4-snooping

Enable ‘arp inspection untrusted on the end-user physical pons

NEW QUESTION 25
Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.
What are valid questions to determine their wired network needs? (Select two.)

How experienced is your networking team?

What is the current cabling deployed in the location?

What are the current device capabilities and topology?

Do you plan to add new customer services?

How much do you plan to spend in the new wired network?

NEW QUESTION 26
Which functionalities of ClearPass can be added in a wired network that implements dynamic segmentation?
(Select two.)

Profiling

Fingerprinting

Downloadable user Roles

Multi Factor Authentication

Dynamic VLANs

NEW QUESTION 27
Refer to the exhibit.

You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?

On VSX LAG 1

On a dedicated link created using port 1’1/48 of each aggregation switch

On the OOBM ports of both aggregation switches

On VSX LAG 101

NEW QUESTION 28
Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

Use of ACL’s to separate the company networks at the VLAN level

Use of Aruba Gateway appliance to control the routes between merged networks

Use of vsf capable switch to integrate the routing

Use of virtual route forwarding and BGP route leaking

NEW QUESTION 29
A customer wants to verify the proposed configuration snippets to create a point-to-point link between Aruba Switch and a third-party switch.

Will this configuration work with static routing?

No, the configuration will not work, because the Aruba Switch has an MTU mismatch which will prevent IP communication.

No. the configuration will not work, because the Aruba Switch does not have a locally reachable IP address from the third-party switch.

No. the configuration will not work because the Aruba Switch does not have the “routing” command on it

yes, the configuration should work fine and has no issues

NEW QUESTION 30
You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

Enable debug of vri with “console” set as the destination

Setup a mirror session to generate a Tshark file.

Setup a mirror session to niter packets for TCPDUMP analysis

Check the configured VLANs using “show vsx config-consistency”

NEW QUESTION 31
A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces The network administrator then migrates successfully from Cisco to Aruba The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality What is the preferred solution with the least amount of configuration and disturbance?

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure active gateway IP with the default gateway address on every VLAN interface on Doth switches

For every VLAN Interface, configure a VRRP IP address with the same IP address as already present in the first VSX node. Configure this on both switches.

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure VRRP with the default gateway address as virtual IP-address per VLAN.

For every VLAN interface, configure an active gateway IP with the same IP address as already present in the first VSX node Configure this on both switches

NEW QUESTION 32
You need to establish a baseline summary of an ArubaOS-CX switch resource utilization after enabling new NAE scripts. How should you define a baseline for switch resource consumption? (Select two.)

show system cpu

top memory

show system memory

top cpu

NEW QUESTION 33
A customer is installing a new ArubaOS-CX switch The customer does not change the factory default QoS configuration The switch receives an 802.1Q tagged VOIP frame on a port The header contains a DSCP value of EF(46) and the frame has an 802 ip value of 5 How will the switch forward the frame?

Forwards it based on the DSCP value in the frame

The switch trusts the settings and It forwards the frame with the current settings

Forwards it based on the 802 ip value in the frame

Forwards the frame with best effort forwarding

NEW QUESTION 34
Refer to the exhibit.

* For all traffic within VLAN 10. a remark action or DSCP value EF must be set
* For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration?
A)

B)

C)

D)