Released HP HPE7-A02 Updated Questions PDF [Q41-Q60]

5/5 - (1 vote)

Released HP HPE7-A02 Updated Questions PDF

HPE7-A02 Dumps and Practice Test (161 Exam Questions)

Aruba is a well-known provider of networking solutions and has established itself as an industry leader in wireless networking, network access control, and network security. The HPE7-A02 certification exam focuses on Aruba’s network security solutions and is an essential certification for IT professionals working with Aruba’s products and solutions.

NEW QUESTION 41
A company is implementing HPE Aruba Networking Wireless IDS/IPS (WIDS/WIPS) on its AOS-10 APs, which are managed in HPE Aruba Networking Central.
What is one requirement for enabling detection of rogue APs?

Each VLAN in the network assigned on at least one AP’s or AM’s port

A Foundation with Security license for each of the APs

One AM deployed for every one AP deployed

A manual radio profile that enables non-regulatory channels

NEW QUESTION 42
A company is implementing a client-to-site VPN based on tunnel-mode IPsec.
Which devices are responsible for the IPsec encapsulation?

Gateways at the remote clients’ locations and devices accessed by the clients at the main site

The remote clients and devices accessed by the clients at the main site

The remote clients and a gateway at the main site

Gateways at the remote clients’ locations and a gateway at the main site

NEW QUESTION 43
You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate- based authentication of 802.1X supplicants.
How should you upload the root CA certificate for the supplicants’ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage

As a Trusted CA with the AD/LDAP usage

As a Trusted CA with the EAP usage

As a ClearPass Server certificate with the Database usage

NEW QUESTION 44
You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate-based authentication of 802.1X supplicants.
How should you upload the root CA certificate for the supplicants ‘ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage

As a Trusted CA with the AD/LDAP usage

As a Trusted CA with the EAP usage

As a ClearPass Server certificate with the Database usage

NEW QUESTION 45
A company issues user certificates to domain computers using its Windows CA and the default user certificate template. You have set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to authenticate 802.1X clients with those certificates. However, during tests, you receive an error that authorization has failed because the usernames do not exist in the authentication source.
What is one way to fix this issue and enable clients to successfully authenticate with certificates?

Configure rules to strip the domain name from the username.

Change the authentication method list to include both PEAP MSCHAPv2 and EAP-TLS.

Add the ClearPass Onboard local repository to the authentication source list.

Remove EAP-TLS from the authentication method list and add TEAP there instead.

NEW QUESTION 46
A company has Aruba APs that are controlled by Central and that implement WIDS. When you check WIDS events, you see a “detect valid SSID misuse” event. What can you interpret from this event, and what steps should you take?

Clients are failing to authenticate to corporate SSIDs. You should first check for misconfigured authentication settings and then investigate a possible threat.

Admins have likely misconfigured SSID security settings on some of the company’s APs. You should have them check those settings.

Hackers are likely trying to pose as authorized APs. You should use the detecting radio information and immediately track down the device that triggered the event.

This event might be a threat but is almost always a false positive. You should wait to see the event over several days before following up on it.

NEW QUESTION 47
What role can Internet Key Exchange (IKE)/IKEv2 play in an HPE Aruba Networking client-to-site VPN?

It provides an alternative to IPsec that is suitable for legacy clients.

It provides a more modern and secure alternative to IPsec.

It helps to negotiate the IPsec SA automatically and securely.

It helps remote clients download IPsec profiles for later use.

NEW QUESTION 48
What is one use case for implementing user-based tunneling (UBT) on AOS-CX switches?

Centralizing the distribution of wired traffic without requiring HPE Aruba Networking gateways

Tunneling traffic directly to a third-party firewall in a client data center

Adding 802.1X while continuing to use the existing VLAN and ACL structure in the Ethernet network

Applying enhanced security features such as deep packet inspection (DPI) to wired traffic

NEW QUESTION 49
You are configuring the HPE Aruba Networking ClearPass Device Insight Integration settings on ClearPass Policy Manager (CPPM). For which use case should you set the ‘Tag Updates Action” to ” apply for all tag updates”?

When the Device Insight integration poll interval is set to a relatively long interval but you still want CPPM to be informed quickly about devices’ new tags.

When Device Insight tags are only used to identify dangerous devices, and you want to disconnect those devices without having to set up new rules in enforcement policies.

When CPPM is gathering posture information for CPDI, and you want CPDI to always have access to the most up-to-date information.

When you plan to have CPPM issue CoAs for clients with new tags, but do not want to have to list those specific tags in the Device Integration settings in advance.

NEW QUESTION 50
A company wants you to create a custom device fingerprint on CPPM with rules for profiling a group of specialized devices. What is one requirement?

Connecting a known device of this type and getting it discovered in CPPM’s Endpoints Repository.

Enabling HPE Aruba Networking ClearPass Device Insight integration with the correct Data Collector token.

Pre-defining the desired attributes and rules in an XML format file.

Disabling the “Automatically download Endpoint Profiler Fingerprints” feature in cluster-wide parameters.

NEW QUESTION 51
Refer to the exhibit.

You have verified that AOS-CX Switch-1 has constructed an IP-to-MAC binding table in VLANs 10-19.
Now you need to enable ARP inspection for the endpoint connected to Switch-1. What must you do first to prevent traffic disruption?

Configure ARP inspection on VLANs 10-19 on Switch-2.

Configure DHCP snooping on VLANs 10-19 on Switch-2.

Configure Switch-1 uplinks as trusted ARP inspection ports.

Create a static IP-to-MAC binding on Switch-1 for the DHCP server.

NEW QUESTION 52
An AOS-CX switch has been configured to implement UBT to a cluster of three HPE Aruba Networking gateways.
How does the switch determine to which gateways to tunnel UBT users’ traffic?

The switch tunnels all users’ traffic to the gateway configured as the primary gateway in the UBT zone, unless that gateway fails.

The switch tunnels each user’s traffic to the particular gateway assigned as that user’s active user designed gateway.

The switch load balances client traffic across the primary and standby gateway configured in the UBT zone.

The switch tunnels all users’ traffic to the gateway assigned as the switch’s active device designated gateway.

NEW QUESTION 53
A company uses HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application option). In the details for a generic device cluster, you see a recommendation for
“Windows 8/10” with 70% accuracy.
What does this mean?

CPDI has detected that these devices match about 70% of the system rule for defining “Windows
8/10″ devices.

CPDI has matched these devices against several, conflicting system rules. 70% of those rules are for “Windows 8/10” devices.

CPDI has grouped this cluster with similar classified devices. 70% of those classified devices are
“Windows 8/10.”

CPDI has used MAC OUI to group these devices together. The average device’s MAC address matches 70% of the “Windows 8/10” OUI.

NEW QUESTION 54
Admins have recently turned on Wireless IDS/IPS infrastructure detection at the high level on HPE Aruba Networking APs. When you check WIDS events, you see several RTS rate and CTS rate anomalies, which were triggered by neighboring APs.
What can you interpret from this event?

These neighboring APs are likely to be wireless clients that are inappropriately bridging their wired and wireless NICs; you should track down and remove them.

These neighboring APs might be hackers trying to launch a DoS, but are more likely operating normally; you should start by tuning the event thresholds.

These neighboring APs are actually rogue APs, and you should enable wireless tarpit containment on them.

These neighboring APs are actually rogue APs, and you should enable wireless de-authentication containment on them.

NEW QUESTION 55
HPE Aruba Networking Central displays a Gateway Threat Count alert in the alert list. How can you gather more information about what caused the alert to trigger?

Use HPE Aruba Networking Central tools to run a Network Check on the gateway with which the alert is associated.

Use Live Monitoring on the gateway to download a packet capture of recent traffic flowing through the gateway.

Check the threat list for the gateway associated with the alert. Access threat details and download packet info.

Check the gateway’s Audit Trail in HPE Aruba Networking Central for more details about the threats that triggered the alert.

Gateway Threat Count Alert
This alert indicates that the gateway has detected threats in traffic passing through it. HPE Aruba Networking Central provides tools to investigate and analyze these threats in detail.
Analysis of Each Option
A: Use HPE Aruba Networking Central tools to run a Network Check on the gateway with which the alert is associated:
* Incorrect:
* Network Check tools in Central are primarily used for connectivity and performance diagnostics, not for analyzing detected threats.
* This does not provide insight into the specific threats triggering the Gateway Threat Count alert.
B: Use Live Monitoring on the gateway to download a packet capture of recent traffic flowing through the gateway:
* Incorrect:
* Live Monitoring and packet capture can provide raw traffic data, but interpreting this requires significant manual analysis.
* The Gateway Threat Count alert already provides summarized threat insights that are easier to access via the threat list.
C: Check the threat list for the gateway associated with the alert. Access threat details and download packet info:
* Correct:
* The threat list is specifically designed to display detailed information about detected threats, such as their type, severity, and source/destination.
* Administrators can access this list in Central for the affected gateway, view granular details, and even download associated packet data for deeper inspection.
D: Check the gateway’s Audit Trail in HPE Aruba Networking Central for more details about the threats that triggered the alert:
* Incorrect:
* The Audit Trail tracks configuration changes and administrative actions, not the details of detected threats.
* It is not relevant for investigating the Gateway Threat Count alert.
Final Recommendation
To gather more information about what caused the Gateway Threat Count alert to trigger, check the threat list for the associated gateway. This provides detailed threat information and the option to download packet data for further analysis.
References
* HPE Aruba Networking Central Threat Management Guide.
* Understanding Gateway IDS/IPS Alerts in Aruba Central Documentation.
* Best Practices for Threat Investigation Using Aruba Central.

NEW QUESTION 56
A company has AOS-CX switches and HPE Aruba Networking APs, which run AOS-10 and bridge their SSIDs. Company security policies require 802.1X on all edge ports, some of which connect to APs. How should you configure the auth-mode on AOS-CX switches?

Leave all edge ports in client auth-mode and configure device auth-mode in the AP role.

Configure all edge ports in client auth-mode.

Configure all edge ports in device auth-mode.

Leave all edge ports in device auth-mode and configure client auth-mode in the AP role.

NEW QUESTION 57
You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate-based authentication of 802.1X supplicants.
How should you upload the root CA certificate for the supplicants’ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage

As a Trusted CA with the AD/LDAP usage

As a Trusted CA with the EAP usage

As a ClearPass Server certificate with the Database usage

NEW QUESTION 58
Refer to the exhibit.

You have verified that AOS-CX Switch-1 has constructed an IP-to-MAC binding table in VLANs 10-19.
Now you need to enable ARP inspection for the endpoint connected to Switch-1. What must you do first to prevent traffic disruption?

Configure ARP inspection on VLANs 10-19 on Switch-2.

Configure DHCP snooping on VLANs 10-19 on Switch-2.

Configure Switch-1 uplinks as trusted ARP inspection ports.

Create a static IP-to-MAC binding on Switch-1 for the DHCP server.

NEW QUESTION 59
A company has HPE Aruba Networking gateways that implement gateway IDS/IPS. Admins sometimes check the Security Dashboard, but they want a faster way to discover if a gateway starts detecting threats in traffic.
What should they do?

Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing.

Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard.

Set up email notifications using HPE Aruba Networking Central’s global alert settings.

Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports.

NEW QUESTION 60
Which issue can an HPE Aruba Networking Secure Web Gateway (SWG) solution help customers address?

The organization needs a faster way to quarantine clients that have generated threats, as detected by third-party firewalls.

Hybrid workers are exposing their computers to risky internet sites and infection by malware when they work from home.

Remote workers need access to private data center applications without exposing those applications to unauthorized users.

The organization currently has no way to prevent users from exfiltrating sensitive data from SaaS applications.

HPE7-A02 certification exam is a challenging and rewarding certification that demonstrates a candidate’s expertise in Aruba’s network security solutions. Passing the exam requires dedication, hard work, and a deep understanding of the topics covered. However, the certification offers many benefits, including higher salaries, career advancement opportunities, and increased credibility in the field of network security.

HPE7-A02 Exam Dumps Pass with Updated 2026 Certified Exam Questions: https://www.dumptorrent.com/HPE7-A02-braindumps-torrent.html

Free Exam Dumps Torrent

Released HP HPE7-A02 Updated Questions PDF [Q41-Q60]

Leave a Reply Cancel reply

Related Posts

Free 365 Days Exam Updates HPE6-A86 dumps with test Engine Practice [Q56-Q73]

Share Latest May-2026 HPE7-A02 DUMP with 130 Questions and Answers [Q60-Q77]

[Apr 05, 2026] Reliable HPE2-B04 Exam Tips Test Pdf Exam Material [Q43-Q57]

[2026] HPE0-V25 by Hybrid Cloud Actual Free Exam Practice Test [Q67-Q88]

[Sep 17, 2025] HPE7-A02 PDF Recently Updated Questions Dumps to Improve Exam Score [Q34-Q58]

HPE0-S59 Pre-Exam Practice Tests (Updated 106 Questions) [Q26-Q47]

Leave a Reply Cancel reply