Share Latest May-2026 HPE7-A02 DUMP with 130 Questions and Answers [Q60-Q77]

NEW QUESTION 60
A company has HPE Aruba Networking gateways that implement gateway IDS/IPS. Admins sometimes check the Security Dashboard, but they want a faster way to discover if a gateway starts detecting threats in traffic.
What should they do?

Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing.

Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports.

Set up email notifications using HPE Aruba Networking Central’s global alert settings.

Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard.

NEW QUESTION 61
You have run an Active Endpoint Security Report on HPE Aruba Networking ClearPass. The report indicates that hundreds of endpoints have MAC addresses but no known IP addresses.
What is one step for addressing this issue?

Set up network devices to implement RADIUS accounting to CPPM.

Add CPPM’s IP address to the IP helper list on routing switches.

Set up switches to implement ARP inspection on client VLANs.

Configure CPPM as a Syslog destination on network devices.

NEW QUESTION 62
A company has HPE Aruba Networking APs running AOS-10 and managed by HPE Aruba Networking Central. The company also has AOS-CX switches. The security team wants you to capture traffic from a particular wireless client. You should capture this client’s traffic over a 15 minute time period and then send the traffic to them in a PCAP file.
What should you do?

Go to the client’s AP in HPE Aruba Networking Central. Use the “Security” page to run a packet capture.

Access the CLI for the client’s AP. Set up a mirroring session between its radio and a management station running Wireshark.

Access the CLI for the client’s AP’s switch. Set up a mirroring session between the AP’s port and a management station running Wireshark.

Go to that client in HPE Aruba Networking Central. Use the “Live Events” page to run a packet capture.

NEW QUESTION 63

All of the switches in the exhibit are AOS-CX switches.
What is the preferred configuration on Switch-2 for preventing rogue OSPF routers in this network?

Disable OSPF entirely on VLANs 10-19.

Configure OSPF authentication on VLANs 10-19 in password mode.

Configure OSPF authentication on Lag 1 in MD5 mode.

Configure passive-interface as the OSPF default and disable OSPF passive on Lag 1.

NEW QUESTION 64
A company wants to turn on Wireless IDS/IPS infrastructure and client detection at the high level on HPE Aruba Networking APs. The company does not want to enable any prevention settings.
What should you explain about HPE Aruba Networking recommendations?

HPE Aruba Networking recommends turning on both wired and wireless prevention whenever you enable detection at high.

HPE Aruba Networking recommends using hybrid AP mode, as opposed to Air Monitors (AMs), when implementing detection without prevention.

HPE Aruba Networking recommends disabling client detection when you configure infrastructure detection at high, as infrastructure detection includes all the client checks and more.

HPE Aruba Networking recommends configuring infrastructure and client detection at a custom level and disabling or tuning some of the settings that are likely to produce false positives.

NEW QUESTION 65
The security team needs you to show them information about MAC spoofing attempts detected by HPE Aruba Networking ClearPass Policy Manager (CPPM).
What should you do?

Export the Access Tracker records on CPPM as an XML file.

Use ClearPass Insight to run an Active Endpoint Security report.

Integrate CPPM with ClearPass Device Insight (CPDI) and run a security report on CPDI.

Show the security team the CPPM Endpoint Profiler dashboard.

NEW QUESTION 66
What is one use case for implementing user-based tunneling (UBT) on AOS-CX switches?

Centralizing the distribution of wired traffic without requiring HPE Aruba Networking gateways

Tunneling traffic directly to a third-party firewall in a client data center

Adding 802.1X while continuing to use the existing VLAN and ACL structure in the Ethernet network

Applying enhanced security features such as deep packet inspection (DPI) to wired traffic

NEW QUESTION 67
An AOS-CX switch has been configured to implement UBT to a cluster of three HPE Aruba Networking gateways.
How does the switch determine to which gateways to tunnel UBT users’ traffic?

The switch tunnels all users’ traffic to the gateway configured as the primary gateway in the UBT zone, unless that gateway fails.

The switch tunnels each user’s traffic to the particular gateway assigned as that user’s active user designed gateway.

The switch load balances client traffic across the primary and standby gateway configured in the UBT zone.

The switch tunnels all users’ traffic to the gateway assigned as the switch’s active device designated gateway.

NEW QUESTION 68
Refer to Exhibit.

A company is using HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application).
In the CPDI interface, you go to the Generic Devices
page and see the view shown in the exhibit.
What correctly describes what you see?

Each cluster is a group of unclassified devices that CPDI’s machine learning has discovered to have similar attributes.

Each cluster is a group of devices that match one of the tags configured by admins.

Each cluster is all the devices that have been assigned to the same category by one of CPDI’s built-in system rules.

Each cluster is a group of devices that have been classified with user rules, but for which CPDI offers different recommendations.

NEW QUESTION 69
A company issues user certificates to domain computers using its Windows CA and the default user certificate template. You have set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to authenticate 802.1X clients with those certificates. However, during tests, you receive an error that authorization has failed because the usernames do not exist in the authentication source.
What is one way to fix this issue and enable clients to successfully authenticate with certificates?

Configure rules to strip the domain name from the username.

Change the authentication method list to include both PEAP MSCHAPv2 and EAP-TLS.

Add the ClearPass Onboard local repository to the authentication source list.

Remove EAP-TLS from the authentication method list and add TEAP there instead.

NEW QUESTION 70
A company has HPE Aruba Networking infrastructure devices. The devices authenticate clients to HPE Aruba Networking ClearPass Policy Manager (CPPM). You want CPPM to track information about clients, such as their IP addresses and their network bandwidth utilization. What should you set up on the network infrastructure devices to help that happen?

Logging with CPPM configured as a Syslog server.

Dynamic authorization enabled in the RADIUS settings for CPPM.

RADIUS accounting to CPPM, including interim updates.

An IF-MAP interface with CPPM as the destination.

NEW QUESTION 71
You are using OpenSSL to obtain a certificate signed by a Certification Authority (CA). You have entered this command:
openssl req -new -out file1.pem -newkey rsa:3072 -keyout file2.pem
Enter PEM pass phrase: **********
Verifying – Enter PEM pass phrase: **********
Country Name (2 letter code) [AU]:US
State or Province Name (full name) [Some-State]:California
Locality Name (eg, city) []:Sunnyvale
Organization Name (eg, company) [Internet Widgits Pty Ltd]:example.com
Organizational Unit Name (eg, section) []:Infrastructure
Common Name (e.g. server FQDN or YOUR name) []:radius.example.com
What is one guideline for continuing to obtain a certificate?

You should use a third-party tool to encrypt file2.pem before sending it and file1.pem to the CA.

You should concatenate file1.pem and file2.pem into a single file, and submit that to the desired CA to sign.

You should submit file1.pem, but not file2.pem, to the desired CA to sign.

You should submit file2.pem, but not file1.pem, to the desired CA to sign.

NEW QUESTION 72
HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected.
You go to the Security > RAPIDS events and see that the attack was “Detect adhoc using Valid SSID.” What is one possible next step?

Make sure that you have tuned the threshold for that check as false positives are common for it.

Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.

Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.

NEW QUESTION 73
A company is using HPE Aruba Networking Central SD-WAN Orchestrator to establish a hub-spoke VPN between branch gateways (BGWs) at 1164 site and VPNCs at multiple data centers. What is part of the configuration that admins need to complete?

In VPNCs’ groups, establish VPN pools to control which branches connect to which VPNCs.

In BGWs’ and VPNCs’ groups, create default IKE policies for the SD-WAN Orchestrator to use.

In BGWs’ groups, select the VPNCs to which to connect in a DC preference list.

At the global level, create default IPsec policies for the SD-WAN Orchestrator to use.

NEW QUESTION 74
As part of setting up an HPE Aruba Networking ClearPass Onboard solution for wireless clients, you created Network Settings, a Configuration Profile, and a Provisioning Settings object in ClearPass Onboard. You also ran the ClearPass Onboard Service Only Template on ClearPass Policy Manager (CPPM).
You now need to ensure that only domain users are authenticated and allowed to log into the ClearPass Onboard portal.
Which component should you edit?

The Network Settings on ClearPass Onboard

The ClearPass Onboard Service Pre-Auth service on CPPM

The 802.1X services on CPPM used for wireless clients

The Provisioning profile on ClearPass Onboard

NEW QUESTION 75
You are using Wireshark to view packets captured from HPE Aruba Networking infrastructure, but you’re not sure that the packets are displaying correctly. In which circumstance does it make sense to configure Wireshark to ignore protection bits with the IV for the 802.11 protocol?

When the traffic was captured on the data plane of an HPE Aruba Networking gateway and sent to a remote IP.

When the traffic was mirrored from an AOS-CX switch port connected to an AP.

When the traffic was captured from an AP with HPE Aruba Networking Central.

When the traffic was captured on the control plane of an HPE Aruba Networking MC and sent to a remote IP.

NEW QUESTION 76
You have run an Active Endpoint Security Report on HPE Aruba Networking ClearPass. The report indicates that hundreds of endpoints have MAC addresses but no known IP addresses.
What is one step for addressing this issue?

Set up network devices to implement RADIUS accounting to CPPM.

Add CPPM’s IP address to the IP helper list on routing switches.

Set up switches to implement ARP inspection on client VLANs.

Configure CPPM as a Syslog destination on network devices.

NEW QUESTION 77
HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected. You go to the Security > RAPIDS events and see that the attack was “Detect adhoc using Valid SSID.” What is one possible next step?

Make sure that you have tuned the threshold for that check as false positives are common for it.

Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.

Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.

Free Exam Dumps Torrent

Share Latest May-2026 HPE7-A02 DUMP with 130 Questions and Answers [Q60-Q77]

Leave a Reply Cancel reply

Related Posts

Released HP HPE7-A02 Updated Questions PDF [Q41-Q60]

Free 365 Days Exam Updates HPE6-A86 dumps with test Engine Practice [Q56-Q73]

[Apr 05, 2026] Reliable HPE2-B04 Exam Tips Test Pdf Exam Material [Q43-Q57]

[2026] HPE0-V25 by Hybrid Cloud Actual Free Exam Practice Test [Q67-Q88]

[Sep 17, 2025] HPE7-A02 PDF Recently Updated Questions Dumps to Improve Exam Score [Q34-Q58]

HPE0-S59 Pre-Exam Practice Tests (Updated 106 Questions) [Q26-Q47]

Leave a Reply Cancel reply