Q60. In the pre-design phase, a plumbing engineer identified that the low-flow fixtures which met the Owner’s requirements could achieve total reductions in indoor water usage of 39%. Which strategies should be assessed to meet the Owner’s Project Requirements goals of 45% reduction?

Q61. For Energy and Atmosphere Prerequisite, Fundamental Commissioning (Cx) and Verification, the final Cx report must include the

Q62. For a retail LEED Interior Design and Construction project, the products include 25% by cost Cradle to Cradle v3, Gold certified products, and 25% by cost products assessed with the GreenScreen List Translator. Which of the following Materials and Resources and Innovation credits can the project team achieve?

Q63. A Client is fitting out a building with area 20,500 ft2 (1 904.5 m2) and wishes to pursue the Energy and Atmosphere Credit, Enhanced Commissioning. Who may be appointed as the Commissioning Authority (CxA) for the project?

Q64. A photovoltaic (PV) system was installed after commissioning (Cx) was completed on a 35,000 ft2 (3 252 m2) project. What actions need to take place in order to meet compliance for Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification?

Q65. Which of the following is required for a cooling tower and evaporative condenser in the Water Efficiency Prerequisite, Indoor Water Use Reduction?

Q66. Which of the following must be considered in order to meet Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management if the tenant requires 24-hour cooling in a server room?

Q67. If the client has purchased green power that is not Green-e certified, then the project team should

Q68. Which standard reference can be used to find minimum ventilation rates?

Q69. What primary role does the LEED AP have during the LEED certification process?

Q70. What should a team focus on first to significantly improve energy performance or achieve the lowest possible operation cost?

Q71. A tenant space includes an open office floor plan of 100 workstations and 10 enclosed offices where each workspace is designed for individual use. Based on the requirements of Indoor Environmental Quality Credit, Interior Lighting, what is the minimum number of occupants requiring individual controls to achieve one point?

Q72. A project owner is seeking Location & Transportation Credit, Surrounding Density and Diverse Uses for an office that is being relocated. In order to promote walkability and reduce the distance driven by employees, which of the following solutions should the project owner consider?

Q73. Which strategy could be incorporated into the negotiations of a lease agreement between a tenant and building owner to contribute towards earning a LEED credit?

Q74. Which material would have the largest contribution to Materials and Resources Credit, Building Product Disclosure and Optimization- Sourcing of Raw Materials, Option 2. Leadership Extraction Practices?

Q75. The project material costs for Building Product Disclosure and Optimization cost-based credits are

Q76. Which of the following are regularly occupied spaces in a commercial application?

Q77. Discussing the project goals to help identify the credits and options that the team should attempt is an example of

Q78. A tenant moving into an existing building will need to install new HVAC, power, lighting systems and other equipment.
Which of the following resources would help the tenant meet the requirements of Energy and Atmosphere Credit, Optimize Energy Performance?

Q79. In addition to the basic requirements for Energy and Atmosphere, Fundamental Commissioning and Verification, which is required to achieve Energy and Atmosphere, Enhanced Commissioning, Option 1?

Q80. A mechanical engineer needs to identify spaces that are considered densely occupied according to LEED in order to document

Q81. A project team member has prepared a map and an accompanying table as documentation for Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2. Diverse Uses. The map includes the location of each use, the location of the project, and the main entrance of the building. The table includes the distance to each use, the name of each use, and the category of each use. The team lead reviews the documentation and notes an important missing item. Which of the following s the most important item to add to the documentation?