NO.35 A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)

B)

C)

D)

NO.36 What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

NO.37 What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

NO.38 Where is the data stored to allow Easy Restore to successfully complete a system board replacement?

NO.39 What can be done using in-band management?

NO.40 Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?

NO.41 What is a characteristic of out-of-band management?

NO.42 What is required to use the iSM Automatic System Recovery feature?

NO.43 What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

NO.44 What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

NO.45 What is a consideration when populating DIMMs with different types of persistent memory in a Dell EMC PowerEdge 14G server?

NO.46 How can a technician know whether IDRAC9 System Lockdown mode is enabled?

NO.47 What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

NO.48 Refer to the exhibit.

Match each callout to the Dell EMC PowerEdge server model shown.

NO.49 After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

NO.50 What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

NO.51 What must be done before upgrading OMSA from the 32-bit to the 64-bit version?

NO.52 What is a key feature introduced in OpenManage Mobile v2.0?

NO.53 Which processor configuration is used by the Dell EMC PowerEdge R740 server?

NO.54 A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?

NO.55 An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

NO.56 For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.

NO.57 What is the correct order of steps taken during the BIOS/UEFI Recovery process?