QUESTION 11
How does the optimized roaming function operate in a WLC implementation?

QUESTION 12
A customer requires wireless clients to maintain uninterrupted voice calls while roaming between access points. Which Cisco wireless feature minimizes roaming delay?

QUESTION 13

Refer to the exhibit. A network administrator must configure a client management parameter for a wireless deployment in a multi-site enterprise. The enterprise is using Cisco ISE as the management platform to oversee wireless access policies. To meet the organization’s compliance requirements, all wireless endpoints must be evaluated against a posture policy before gaining access. Which configuration change must be applied on the WLAN level of the WLC to meet the requirement?

QUESTION 14
What is used for measuring gain on a Wi-Fi antenna?

QUESTION 15
Refer to the exhibit. The Catalyst 9800 WLC logs show when a client with MAC address
9C:4E:36:8A:2B:F1 fails to connect to a WLAN configured for Wi-Fi Protected Access 3- Enterprise with 802.1X. Which action must the engineer take to resolve the issue?

QUESTION 16

Refer to the exhibit. A wireless controller is deployed at a branch location to facilitate secure client connectivity. A network engineer configures a WLAN using 802.1X to align with company security policies.
Which configuration enables client authentication for this WLAN?

QUESTION 17
A deployment requires that several APs be connected to edge switches, and each AP must support management and guest Wi-Fi traffic. The APs tag guest traffic separately from management, and the organization expects to add more VLANs for IoT and voice soon, so the configuration must support scalability. The security team requires that guest traffic never mix with internal resources. Which port configuration must be used for the switch interfaces that connect to the APs?

QUESTION 18
A persistent network issue is impacting connectivity for workstations in a training lab when connecting to a lab SSID. Wireless logs show clients never receive a DHCP offer when trying to obtain an IP address. The APs are operating in Local mode. Network monitoring systems indicate optimal signal quality and radio performance, VLAN assignments for the affected SSID have been configured, and all clients are affected.
Which action resolves the issue?

QUESTION 19
An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods are not available. The engineer has set the AP hostname to `AP053540555′, and has configured the AP with a static IP address, subnet mask, and default gateway. The engineer must now configure the AP to discover the primary WLC with hostname `WLC-PRIMARY’ and IP address `192.168.100.10′. Which CLI command must the engineer use on the AP?

QUESTION 20
An engineer must prevent unauthorized rogue APs from connecting to the enterprise wired network. Which Cisco feature best addresses this requirement?

QUESTION 21
A network engineer is integrating Cisco ISE with a wireless controller for 802.1X authentication.
The controller is registered with Cisco ISE as a network device. To secure communication, the engineer must configure a shared secret for RADIUS authentication. Which CLI command on the WLC accomplishes this task?

QUESTION 22
Which benefit does enabling SNMP monitoring provide for Cisco wireless device management?

QUESTION 23

Refer to the exhibit. A startup company has recently moved to new offices and performed a full network refresh. The application development team requested a high-speed reliable wireless network to use for testing real-time applications. Although, the wireless network is Wi-Fi 7 enabled, the wireless clients are connecting using lower speeds. Which configuration must be applied on the WLC to increase throughput?

QUESTION 24
A network engineer must ensure that guest users connecting to a Cisco 9800 WLC are assigned IP addresses from a specific subnet that is separate from corporate users. The guest network must support at least 200 simultaneous connections and isolate traffic from internal devices. The DHCP server must allocate addresses only within the 10.20.30.0/24 subnet. Which action must the network engineer take to accomplish this task?

QUESTION 25
An engineer enables DHCP required on a WLAN. What happens if a client fails to obtain a valid DHCP address?

QUESTION 26
Exhibit:

Refer to the exhibit. A network administrator is working on a WLC to enable user access for employee tablets using PEAP-MSCHAPv2 with a RADIUS backend. The administrator verifies the external authentication configuration and plans to test network connectivity. Which code snippet must be added to the configuration for the WLC to support authentication with an external server?

QUESTION 27
Which function does FRA use to optimize client experience and network coverage?

QUESTION 28
A wireless engineer must manage a scheduled maintenance window for a mesh network within a network that uses Cisco Catalyst Center as the primary monitoring solution. The engineer must coordinate downtime and verify that all services resume as intended after planned tasks are complete. How does the engineer avoid unnecessary alerting in Cisco Catalyst Center throughout the maintenance window?

QUESTION 29
What is the purpose of YANG when used with the NETCONF protocol in the context of Cisco wireless controllers?

QUESTION 30
An IT team is deploying Meraki APs at a remote branch and must ensure that they are automatically assigned to the correct network in the Meraki dashboard. The branch is scheduled to receive 20 new APs, and site connectivity to headquarters was set up. Before shipping the APs, the team must make sure that each one is claimed by the intended network for management and monitoring. Which deployment action must they take before physically connecting the APs?

QUESTION 31
Which result is produced using a power ratio of 10:1 in standard decibel calculations?

QUESTION 32
A medium-sized enterprise must provide wireless internet to visitors in their lobby using a Cisco
9800 WLC. The solution must meet these requirements:
– Ensure that guests cannot access the corporate LAN.
– Guests are redirected to a login page before browsing.
– The guest network must use a separate VLAN from internal users.
– Access must be limited to web browsing only.
– Guest access does not require any preshared keys or certificates.
Which two actions must be taken to achieve this solution? (Choose two.)

QUESTION 33
Refer to the exhibit. An onsite engineer is working to connect devices to the wireless network in a corporate environment. The network requirements dictate that WPA2-Enterprise security must be used with certificate-based mutual authentication to align with enterprise policy, which requires client and server certificates for secure access. After the initial wireless settings are applied on a Windows-based workstation, the engineer must select the appropriate authentication method in the client network properties to complete a successful enterprise Wi-Fi connection. Which option in the “Choose a network authentication method” dropdown meets this requirement?

QUESTION 34
Which process is managed by Ministry of Internal Affairs and Communications in Japan?

QUESTION 35
What is a benefit of applying TACACS authentication for device access?