[Oct 08, 2026] Reliable 350-601 Exam Tips Test Pdf Exam Material [Q28-Q44]

Rate this post

[Oct 08, 2026] Reliable 350-601 Exam Tips Test Pdf Exam Material

New 2026 350-601 Test Tutorial (Updated 423 Questions)

Cisco 350-601 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Data Center Compute	25%	– Compute security and access control – Fabric interconnect and server networking – Integration with virtualization platforms – Cisco UCS architecture and components – Server management and provisioning
Topic 2: Data Center Security	15%	– Segmentation and micro-segmentation – Integration with security services – Compliance and security monitoring – Threat defense and security policies – Access control and authentication
Topic 3: Storage Network	20%	– iSCSI and NAS technologies – Storage networking services and protocols – Fibre Channel and FCoE implementation – Storage high availability and redundancy – Integration with compute and network layers
Topic 4: Data Center Network	25%	– Infrastructure services (DHCP, DNS, NTP) – Fabric infrastructure and management – Implementing routing protocols (OSPF, MP-BGP) – Implementing switching features (vPC, LACP, vDC) – Overlay technologies (VXLAN, EVPN)
Topic 5: Automation and Orchestration	15%	– Infrastructure as Code and automation tools – Monitoring, telemetry and assurance – Cisco UCS Director and Nexus Dashboard – AI and analytics in data center operations – Programmability and APIs (REST, NETCONF, YANG)

Q28. Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?

Any commands that have conflicting settings between roles are denied.

Access to a command takes priority over being denied access to a command.

The first role assigned takes precedence over subsequent roles.

The last role assigned takes precedence over previous roles.

Q29. Which two statements about OTV are true?(Choose two)

The authoritative edge device is the active forwarder for multicast and unknown unicast for all VLANs.

The join interface must be a Layer 2 interface.

no special license is required for OTV.

OTV requires a separate VDC if SVIs for the extended VLANs are to be configured on the same switch.

Only one join interface can be specified per overlay.

OTV runs over a distance victor routing protocol.

Q30. Refer to the exhibit.

Which VLANs are capable to be assigned on vPC interfaces?

100-103

100-104

100-102

100-105

Q31. A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?

Cisco IMC

Adapter

I/O module

BIOS

Q32. A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion. What is a requirement for both physical hosts?

The hosts must run Cisco AsyncOS 10.0 or greater.

The hosts must have access to the same defined network.

The hosts must run different versions of Cisco AsyncOS.

The hosts must use a different datastore than the virtual appliance

Q33. An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

Configure the switchport monitor under interface fc2/2

Configure the switchport mode SD under interface tc2/1.

Configure switchport speed 4000 under interface fc2/2.

Configure session type fc under monitor session 1.

Configure the switchport mode SD under interface fc2/2.

Q34. An engineer must configure a Cisco UCS domain for monitoring and management by the Cisco Intersight SaaS platform. After the setup is complete, administrators must have full control to configure the device through Cisco UCS Manager and Intersight. Which set of actions accomplishes this task?

Configure Devce Connector Access Mode as Allow Control in Device Console Claim the device on Intersight as UCSM Managed Mode.

Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersightc as Intersight Managed Mode

Configure Device Connector Access Moao as Allow Control in Device Console. Claim the device on intersight as Intersight Managed Mode

Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersight as UCSM Managed Mode

Option A

Option B

Option C

Option D

Q35. A company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches.
A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage.
Which set of actions must be taken to meet these requirements?

1. Create a user-defined role and add the required privileges.
2. Assign a role to a user.

1. Add the required privilege to the VDC-admin role.
2. Commit the changes to the active user database.

1. Modify a network-operator role and add the required privileges.
2. Assign a VDC-operator role to a user.

1. Assign the network-admin role to a user.
2. Commit the role to the switch to the active user database

Q36. Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true.

Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.

Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.

The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.

The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.

Q37. Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

Option A

Option B

Option C

Option D

Q38. An engineer must configure Cisco IMC server management NIC for autonegotiation. Which setting should be selected?

Cisco card

shared LOM

dedicated

shared LOM EXT

Q39. Refer to the exhibit A network engineer plans to upgrade the current software images of a Cisco Nexus switch What is the impact of starling the EPLD upgrade?

The switch skips the EPLD upgrade for each EPLD device of the switch.

The switch reboots multiple times for the new EPLD versions to take effect.

The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.

The switch reboots one time for the new EPLD versions to take effect.

Q40. Refer to the exhibit. An engineer must configure port security on the Cisco Nexus 5000 Series Switch that meets these requirements:
– Port security must be applied on VSAN 10 only.
– NWWN 20:10:10:10:10:10:10:10 to log in through SAN port-channel 2.
– Any WWN must be allowed to log in through interfaces fc1/1, fc1/2,
fc1/3.
– Auto learning must be disabled.
Which command set satisfies these conditions?

Nexus5K(config)# port-security database vsan 10
Nexus5K(config-port-security)# nwwn 20:10:10:10:10:10:10:10 interface san-port-channel 2 Nexus5K(config-port-security)# any wwn interface fc1/1-3 Nexus5K(config-port-security)# port-security commit vsan 10

Nexus5K(config)# port-security activate vsan 10 no auto-learn
Nexus5K(config)# port-security database vsan 10
Nexus5K(config-port-security)# nwwn 20:10:10:10:10:10:10:10 interface san-port-channel 2 Nexus5K(config-port-security)# any wwn interface fc1/1-3

Nexus5K(config)# port-security database vsan 10
Nexus5K(config-port-security)# nwwn 20:01:01:01:01:01:01:01 interface san port-channel 5 Nexus5K(config-port-security)# any wwn interface fc1/1-3 Nexus5K(config)# port-security database diff active vsan 10

Nexus5K(config)# port-security database vsan 10
Nexus5K(config-port-security)# nwwn 20:01:01:01:01:01:01:01 interface port-channel 5 Nexus5K(config-port-security)# any wwn interface fc1/1-3 Nexus5K(config)# port-security database diff active vsan 10

Q41. Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?

Option A

Option B

Option C

Option D

Q42.

Refer to the exhibit. An engineer must configure a QoS policy that controls only vHBA traffic. Which policy must be used to meet this requirement?